The Cloud Eh!?

Tag: Server

Windows Server 2012 RC Install

by Leave a comment

Been fairly busy lately, haven’t had a whole lot of time to play in the LAB. Today decided it would be a great day to sit and relax and catch up on some things. Following screen shots are just from a base install of Windows Server 2012 RC with GUI. Nothing fancy at all Smileor advanced.

I’m using my lab to run W2k12 as a VM, the lab is running ESXi 5.0.0 768111 anything less and you will get issues trying to install the RC version.

Once you have the VM configured, which I have only assigned 1 CPU/2 RAM/60 GB Disk this VM is just to look at the install and have a browse at some new features and the GUI

This is the first screen you will see when you power on the VM and load the ISO

clip_image001

At this point you will get to pick your regional settings.

clip_image002

At this point you are prompted to install the OS, or repair your OS if there is problems.

clip_image003

With the RC version you have to options to Chose, either Server Core Installation or Server with a GUI. For this install I am going to chose GUI, another blog I will go ahead and just pick the core version.

clip_image004

Of course the “License Terms” Accept and on your go.

clip_image005

As you can see the install is very similar to Windows Server 2008 R2/Windows 7/Windows 8 which we all expected.

clip_image006

Pick your drive to install on.

clip_image007

At this point you can walk away. But don’t go for very long, the entire install process took only 25 Minutes.

clip_image008

In total I counted 2 Reboots that occur, but they are very quick.

Iclip_image009

Go ahead and chose a password. One new feature I noticed on this screen is that you can show your password, this allows you to make sure you are typing the correct information in both boxes. In the dialog box, when you have it selected there will be a little Black Circle with a half Circle underneath it. To display your password click and hold, if you do not click and hold you will not be able to see your password.

clip_image010

You can also use accessibility options, and change the keyboard layout.

clip_image011

the install is complete. As you see from below the screen for logon is different. But not in a bad way.

clip_image012

Type in your password

clip_image013

Wait for your profile to setup.

clip_image014

Once your profile is complete you are brought to the Server Manager.

clip_image015

As you can see the install is very straight forward. This is all I am going to show in this post, but I plan to show more as I play more with Windows Server 2012 RC.

DISM Windows Server 2008 R2 Change Edition

by 10 Comments

Hit a little issue in my lab today, It happens that I went ahead and installed Windows Server 2008 R2 Standard for a bunch of my Lab VM’s. Now the issue is that I need Windows Server 2008 R2 Enterprise Edition to support the Windows Failover Clustering feature.

So long story short, I didn’t want to have to fully rebuild my Lab VM’s. So I went looking around and found a very nice way to in place upgrade to Enterprise Edition.

The command that we are going to use is the DISM.exe command (Deployment Image Servicing and Management Tool), that is available in Windows 7 and Windows Server 2008 R2. You can find out more about the Tool HERE

  • First of all go ahead and on the server you want to run this command open up PowerShell as an administrator.
  • Click on the “Start Button” Type Power, PowerShell will then show under programs, Right Click the PowerShell Icon and select “Run as administrator.

image

  • Enter is this command in the window to find the version you are running, just to confirm. “DISM /online /Get-CurrentEdition”

image

    • Enter the following command to see which version you can in place upgrade too “DISM /online /Get-TargetEditions” You can see from the output of the command window, Windows Server 2008 R2 Standard can be upgraded to Enterprise and DataCenter.

image

  • Enter in the following command to upgrade your version of Windows Server. In my case I am going to be upgrading too Windows Server 2008 R2 Enterprise Edition, and the following command will do this. You need to have a key for Enterprise edition and fill in the XXXX with that information. Once the command is done running you will need to restart your computer, if you are ready just type “Y”.

“DISM /online /Set-Edition:ServerEnterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX”

image

  • Once the computer restarts, you can go ahead and look at your computer properties, and you will now see you are running Windows Server Enterprise. Well in my case anyways.

image

Errors: If you get an error while running this prodcedure, see if any of the below issue will resolve the issue.

  1. “Setting an Edition is not supported with online images” More than likley the reason you are getting this error is because the server you are trying to inplace upgrade has the AD DS Role installed and is acting as a domain controller. The only way to upgrade this one is to move the FSMO Roles to another server, then DCpromo the server, and make it a member server and then run the command, and then you can go ahead and make the server a Domain Controller once the edition of Windows has been changed.
  2. “The specified product key is not valid for the target edition. Run this command again with a product key specific to the target edition.” I have no reason why this issue happens,(its key confusion of some sort) but to fix it you can go ahead and use the default KMS key provided by Microsoft 489J6-VHDMP-X63PK-3K798-CPX3Y, use this key in the command, and once the system reboots, go into the Server Manager and change and activate the softare with your own key.

Note: You cannot downgrade with this method, just upgrade. Also please do this at your own risk, I am doing this in a Lab Environment which is going to impact only one me. This is not a major upgrade, basically all it is doing is changing the product key if need be, and changing some registry values.